1. INVERTERS Three Phase Inverter SE12.5K - SE27.6K solaredge.com Specifically designed to work with power optimizers Superior efficiency (98.3%) Internet connection through Ethernet or Wireless IP65 – Outdoor and indoor installation Fixed voltage inverter for longer strings Smart Energy Management control Optional DC surge protection and DC fuses Optional integrated DC Safety Unit - eliminates the need for external DC isolators Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Small, lightest in its class, and easy to install Built-in module-level monitoring 12-20 YEAR WARRANTY Advanced safety features - integrated arc fault protection and optional rapid shutdown

2. Three Phase Inverter SE12.5K - SE27.6K © SolarEdge Technologies, Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 11/2019/V02/ENG R OW. Subject to change without notice. (1) Where permitted by local regulations (2) Refer to Datasheets -> Communications category in Downloads page for specifications of optional communication options: http://www.solaredge.com/groups/support/downloads (3) Wi-Fi connectivity requires an external antenna. For more information refer to: https://www.solaredge.com/sites/default/files/se-wifi-zigbee-antenna-datasheet.pdf (4) Inverter with rapid shutdown part number: SExxK-RWRxxxxxx; available for SE25K and SE27.6K (5) Provided with the inverter in India only. For other countries an SPD plug-in can be purchased. Refer to: https://www.solaredge.com/sites/default/files/se_spd_plug_in_for_rs485_3ph_setapp_ds.pdf (6) For all standards refer to Certifications category in Downloads page: http://www.solaredge.com/groups/support/downloads (7) For power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note.pdf SE12.5K SE15K SE16K SE17K SE25K SE27.6K Applicable to inverters with part number SEXXK - XXXXXBXX4 OUTPUT Rated AC Power Output 12500 15000 16000 17000 25000 27600 VA Maximum AC Power Output 12500 15000 16000 17000 25000 27600 VA AC Output Voltage - Line to Line / Line to Neutral (Nominal) 380 / 220 ; 400 / 230 Va c AC Output Voltage - Line to Neutral Range 184 - 264.5 Va c AC Frequency 50/60 ± 5 Hz Maximum Continuous Output Current (per Phase) 20 23 25.5 26 38 40 A Grids Supported - Three Phase 3 / N / PE (WYE with Neutral) Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds Yes THD < 3 INPUT Maximum DC Power (Module STC) 16850 20250 21600 22950 33750 37250 W Transformer-less, Ungrounded Yes Maximum Input Voltage 1000 Vd c Nominal DC Input Voltage 750 Vdc Maximum Input Current 21 22 23 23 37 40 Adc Reverse-Polarity Protection Yes Ground-Fault Isolation Detection 700kΩ Sensitivity 350kΩ Sensitivity (1) Maximum Inverter Efficiency 98 98.3 % European Weighted Efficiency 97.7 97.6 97.7 97.7 98 % Nighttime Power Consumption < 2.5 < 4 W ADDITIONAL FEATURES Supported Communication Interfaces (2) RS485, Ethernet, Wi-Fi (requires antenna) (3) , ZigBee (optional), Cellular (optional) Inverter Comissioning With the SetApp mobile application using built-in Wi-Fi access point for local connection Smart Energy Management Export Limitation Arc Fault Protection Integrated, User Configurable (According to UL1699B) Rapid Shutdown Optional (4) (Automatic upon AC Grid Disconnect) RS485 Surge Protection Optional (5) DC SAFETY UNIT ( OPTIONAL ) 2-pole Disconnection N/A 1000V / 40A DC Surge Protection N/A Type II, field replaceable DC Fuses on Plus & Minus N/A Optional, 20A Compliance N/A UTE-C15-712-1 STANDARD COMPLIANCE Safety IEC-62103 (EN50178), IEC-62109, AS3100 Grid Connection Standards (6) VDE-AR-N-4105, G59/3, AS-4777,EN 50438 , CEI-021,VDE 0126-1-1, CEI-016, BDEW Emissions IEC61000-6-2, IEC61000-6-3 , IEC61000-3-11, IEC61000-3-12 RoHS Yes INSTALLATION SPECIFICATIONS AC Output Gland Diameter / Wire Cross Section 15-21mm / Solid wire 2.5-16 mm 2 18-25mm / Solid wire 2.5-16 mm 2 , Stranded wire 2.5-10 mm 2 DC Input 2 MC4 pairs 3 MC4 pairs DC Input with Safety Unit N/A Gland diameter 5 - 10 mm N/A Wire cross section 0.5 - 13.5 mm 2 Dimensions (HxWxD) 540 x 315 x 260 mm Dimensions with Safety Unit (HxWxD) N/A 775 x 315 x 260 mm Weight 30.7 42.5 kg Weight with Safety Unit N/A 45.5 kg Operating Temperature Range -40 - +60 (7) ̊C Cooling Fan (user replaceable) Noise < 50 < 55 dBA Protection Rating IP65 - Outdoor and Indoor Mounting Bracket Provided